Saunders® S360

 

Overview


The Saunders® S360 piston actuator permits remote operation of the valve, either as an alternative to manual operation or as an integral part of a control system. The S360 is a compact, lightweight, piston-type pneumatic actuator which has been developed to deliver superior performance for sterile BioPharm applications.


The Saunders® S360 housing is manufactured from polished 316 Stainless Steel producing a robust design, a clean OD profile and an attractive appearance. It can withstand typical industry wash down regimes.


The S360 is a piston-type actuator that provides reliable performance, high cycle life, lower air consumption and more compact design versus diaphragm type actuators.


The modular design offers two different spring- to-close versions; the S360 Lite with compact, lightweight design for typical applications and the S360 Power for maximum high pressure duty or for severe closure applications.


The S360 range also includes normally open, double acting, and options for limiting travel and direct switch mount variations. All models have a bright yellow visual indicator as standard.

 

Navigation


 

Features and Benefits

 

  • Modular range delivers compact dimensional envelope to reduce dead-leg between associated valves and optimizes system design.
  • Maintenance free piston technology provides powerful closure performance.
  • Smooth corrosion resistant profile optimizes cleanability.

 

Full 360° Rotation DN15-DN50 (0.5" - 2.0")

DN25-S360-Actuator--Air-Cons-001web.jpg


The Saunders® S360 features the ability to fully rotate the actuator head by 360°, enabling flexible installation and air port alignment. This in turn reduces installation cost and optimizes incorporation into compact valving arrays or skid arrangements.


Refer to the Installation, Operation, and Maintenance Manual for complete instructions on 360° rotation and compressor conversion.


Easy Compressor Change

DN25-S360-Actuator--Air-Cons-001web.jpg


The Saunders® S360 has a unique compressor attachment that permits easy conversion of the compressor between rubber and PTFE diaphragms.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back to Top

 


 

Applications

 

 

The Saunders® S360 Actuator has been designed and engineered to deliver optimum performance over the full range of operating conditions found in bioprocess plants. The diaphragm in a weir type diaphragm valve has a large wetted surface that is exposed to pressure in the process line. This means that line pressure has a large impact on required actuator opening and closing forces.


The majority of applications produce pressure on one side of the weir only. This condition is typically called 100% pressure drop, or 100% ΔP. When this occurs, only half the wetted area of the diaphragm is exposed to line pressure.

saunders-s360-actuator-typical-applications.jpg

100% Pressure Drop

line-pressure is on one side of weir only

This is the most common service condition.


The force on the diaphragm is greatest when there is pressure on both upstream and downstream sides of the weir. This condition is generally called 0% pressure drop, or 0% ΔΔP. When this occurs the total wetted area of the diaphragm is exposed to line pressure. This is not a common condition in BioPharm applications.

 

saunders-s360-actuator-typical-applications-2.jpg

0% Pressure Drop

line-pressure is on both sides of weir

Maximum force is working against actuator.


Please contact Saunders® directly or review actuator sizing charts and data sheets for additional information regarding actuator selection. Technical information, sizing charts, and datasheets can be accessed or downloaded at www.cranebiopharm.com.

 

 

Back to Top

 


 

 

Technical Details

 

Modular Design


The Saunders® S360 modular range delivers optimum dimensional envelope and closure performance. There are two different spring-to-close versions available; the S360 Lite and S360 Power actuator that delivers industry leading closure performance and allows complete flexibility to suit a wide range of pressure and flow conditions.

 

Saunders® S360 Lite


The S360 Lite range provides standard closure for normally closed applications in a very compact, lightweight package and is ideal for most applications. The S360 Lite fits into tight piping arrays – and its compact size can even help reduce block valve design and is available through sizes DN8 – DN100 (0.25” – 4.00”).

Lite-Range-001web

 

Closure Performance (Saunders® S360 Lite Normally Closed)
 Line Pressure 
SizePTFERubberControl PressureWeight
DN8 (0.25")16bar (232 psi)16bar (232psi)6bar (87 psi)0.6kg (1.32lbs)
DN15 (0.50")10bar (145 psi)10bar (145psi)6bar (87 psi)1.20kg (2.6lbs)
DN20 (0.75")10bar (145 psi)10bar (145psi)6bar (87 psi)2.10kg (4.62lbs)
DN25 (1.00")10bar (145 psi)10bar (145psi)6bar (87 psi)2.3kg (5.06lbs)
DN40 (1.50")10bar (145 psi)10bar (145psi)6bar (87 psi)3.50kg (7.7lbs)
DN50 (2.00")10bar (145 psi)10bar (145psi)6bar (87 psi)7.70kg (17lbs)
DN65 (2.50")10bar (145 psi)10bar (145 psi)6bar (87 psi)17.5kg (38.6lbs)
DN80 (3.00")10bar (145 psi)10bar (145 psi)6bar (87 psi)32kg (70.6lbs)
DN100 (4.00")10bar (145 psi)10bar (145 psi)6bar (87 psi)35.8kg (78.9lbs)

 


All pressures are gauge pressures. Line pressure values were determined with pressure on one side of the weir only. This condition is called 100% pressure drop, or 100% ΔP. Information on line pressure applied to both upstream and downstream sides of the weir is available on request.

 

Saunders® S360 Power


The Saunders® S360 Power range offers higher operating closure performance in a compact package for high operating pressure or atypical closing conditions with high pressure on both sides of the weir. The S360 Power spring-to-close actuator is available through sizes DN15 – DN50 (0.50” – 2.00”).

Lite-Range-001web

 

Closure Performance (Saunders® S360 Power Normally Closed)
 Line Pressure 
SizePTFERubberControl PressureWeight
DN15 (0.50")16bar (232 psi)16bar (232psi)6bar (87psi)1.2kg (2.6lbs)
DN20 (0.75")16bar (232 psi)16bar (232psi)6bar (87psi)2.8kg (6.2lbs)
DN25 (1.00")16bar (232 psi)16bar (232psi)6bar (87psi)2.9kg (6.4lbs)
DN40 (1.50")16bar (232 psi)16bar (232psi)6bar (87psi)5.8kg (12.8lbs)
DN50 (2.00")16bar (232 psi)16bar (232psi)6bar (87psi)9.7kg (21.4lbs)

 


All pressures are gauge pressures. Line pressure values were determined with pressure on one side of the weir only. This condition is called 100% pressure drop, or 100% ΔP. Information on line pressure applied to both upstream and downstream sides of the weir is available on request.


The Saunders® S360 actuator is also available in normally open and double acting modes of operation through sizes DN8 – DN100 (0.25” – 4.00”). Please refer to Saunders® data sheets for additional information on S360 normally closed and double acting variants. Technical information, sizing charts, and datasheets can be accessed or downloaded at www.saundersS360.com.


PDF dimensional drawings, 2D AutoCAD, and 3D IGES Files of the Saunders® S360 actuator are available at saundersdrawings.com.

 

 

Back to Top

 


 

 

 

Finishes and Accessories

 

Marking

DN-100-SC-with-Stickers-002web


Identification label adhered to actuator and contains the following: 

Valve Size 
Model Identification 
Maximum Air Supply

 



Available Accessories

  • Position Feedback
  • Adjustable Limit Open and Close Stop
  • Valve Positioners
  • Manual Override
  • Other Accessories on Request

 

 DN-100-SC-with-Stickers-002webDN-100-SC-with-Stickers-002web 

Visit www.saundersS360.com for additional information on other Saunders® products, including technical datasheets, drawing library, and product selection tools.

 

Back to Top

 

 


 

 

 

Design Variations

 

Saunders® S360 Lite


s360-lite


The S360 Lite range provides standard closure for normally closed applications in a very compact, lightweight package and is ideal for most applications. The S360 Lite fits into tight piping arrays – and its compact size can even help reduce block valve design and is available through sizes DN8 – DN100 (0.25” – 4.00”).

 

 

Closure Performance (Saunders® S360 Lite Normally Closed)
SizeLine PressureControl PressureWeight
PTFERubber
DN8 (0.25")16bar (232 psi)16bar (232psi)6bar (87 psi)0.6kg (1.32lbs)
DN15 (0.50")10bar (145 psi)10bar (145psi)6bar (87 psi)1.20kg (2.6lbs)
DN20 (0.75")10bar (145 psi)10bar (145psi)6bar (87 psi)2.10kg (4.62lbs)
DN25 (1.00")10bar (145 psi)10bar (145psi)6bar (87 psi)2.3kg (5.06lbs)
DN40 (1.50")10bar (145 psi)10bar (145psi)6bar (87 psi)3.50kg (7.7lbs)
DN50 (2.00")10bar (145 psi)10bar (145psi)6bar (87 psi)7.70kg (17lbs)
DN65 (2.50")10bar (145 psi)10bar (145 psi)6bar (87 psi)17.5kg (38.6lbs)
DN80 (3.00")10bar (145 psi)10bar (145 psi)6bar (87 psi)32kg (70.6lbs)
DN100 (4.00")10bar (145 psi)10bar (145 psi)6bar (87 psi)35.8kg (78.9lbs)

 


All pressures are gauge pressures. Line pressure values were determined with pressure on one side of the weir only. This condition is called 100% pressure drop, or 100% ΔP. Information on line pressure applied to both upstream and downstream sides of the weir is available on request.



 

SC_EN_Lite.jpg


Graphs denote the operating air required to fully open the actuator at a given line pressure.

 

 

 

 

Saunders® S360 Power


saunders-s360-lite-actuator.jpg


The Saunders® S360 Power range offers higher operating closure performance in a compact package for high operating pressure or atypical closing conditions with high pressure on both sides of the weir. The S360 Power spring-to-close actuator is available through sizes DN15 – DN50 (0.50” – 2.00”).

 

 

Closure Performance (Saunders® S360 Power Normally Closed)
SizeLine PressureControl PressureWeight
PTFERubber
DN15 (0.50")16bar (232 psi)16bar (232psi)6bar (87psi)1.2kg (2.6lbs)
DN20 (0.75")16bar (232 psi)16bar (232psi)6bar (87psi)2.8kg (6.2lbs)
DN25 (1.00")16bar (232 psi)16bar (232psi)6bar (87psi)2.9kg (6.4lbs)
DN40 (1.50")16bar (232 psi)16bar (232psi)6bar (87psi)5.8kg (12.8lbs)
DN50 (2.00")16bar (232 psi)16bar (232psi)6bar (87psi)9.7kg (21.4lbs)

 


All pressures are gauge pressures. Line pressure values were determined with pressure on one side of the weir only. This condition is called 100% pressure drop, or 100% ΔP. Information on line pressure applied to both upstream and downstream sides of the weir is available on request.

SC_EN_Power.jpg


Graphs denote the operating air required to fully open the actuator at a given line pressure.

 

 

 

 

Saunders® S360 Normally Open Actuator


Normally Open_EN.jpg

 

 

 

 

Saunders® S360 Double Acting Actuator


Double Acting_EN.jpg 

 

 

 

Back to Top

 

 


 

 

Dimensions

 


saunders-s360-dimensions-sketch-metric.gif

S360 Lite Normally Closed Actuator Dimensions

 

 


S360 Lite Normally Closed Actuator Dimensions (Metric)

Actuator SizeDimensions (mm)Actuator Weight (Kg)
ABCDEFlanged
DN887791955-0.6
DN151341255268-1.2
DN201541415488-2.1
DN251611465988-2.3
DN402071857198-3.5
DN5026023285123-7.7
DN6533429472186-17.5
DN8039234489236-32.0
DN10042034589236-35.8

 

S360 Lite Normally Closed Actuator Dimensions (Imperial) 

Actuator SizeDimensions (inches)Actuator Weight
ABCDEFlanged
0.25"3.443.130.762.17-1.3
0.50"5.274.912.062.68-2.6
0.75"6.065.552.143.46-4.6
1.00"6.345.752.323.46-5.1
1.50"8.157.282.803.86-7.7
2.00"10.259.153.334.84-17.0
2.50"13.1511.572.837.32-38.6
3.00"15.4313.543.509.29-70.6
4.00"16.5413.583.509.29-78.9

 

S360 Power Normally Closed Actuator Dimensions

 

S360 Power Normally Closed Actuator Dimensions (Metric)

Actuator SizeDimensions (mm)Actuator Weight (Kg)
ABCDEFlanged
DN151341255268-1.2
DN201641515598-2.8
DN251701556098-2.9
DN4022320171123-5.8
DN5026623885150-9.7

 

S360 Power Normally Closed Actuator Dimensions (Imperial) 

Actuator SizeDimensions (inches)Actuator Weight
ABCDEFlanged
0.50"5.274.912.062.68-2.6
0.75"6.445.932.173.87-6.2
1.00"6.696.102.353.86-6.4
1.50"8.787.912.804.84-12.8
2.00"10.479.373.355.91-21.4

 

 

S360 Lite Normally Open Actuator Dimensions

 

 

S360 Lite Normally Open Actuator Dimensions (Metric)

Actuator SizeDimensions (mm)Actuator Weight (Kg)
ABCDEFlanged
DN887791955420.5
DN151341255268521.0
DN201641515598572.6
DN251701556098572.7
DN4022320171123745.0
DN5026623885150868.3
DN653342947318617217.0
DN804073599023611434.0
DN1004343599023611437.0

 

 

S360 Lite Normally Open Actuator Dimensions (Metric)

 

Actuator SizeDimensions (inches)Actuator Weight
ABCDEFlanged
0.25"3.443.130.762.171.651.1
0.50"5.274.912.062.682.032.2
0.75"6.445.932.173.872.245.7
1.00"6.696.102.353.862.246.0
1.50"8.787.912.804.842.9111.0
2.00"10.479.373.355.913.4018.3
2.50"13.1511.572.877.326.7737.4
3.00"16.0214.133.549.294.4974.8
4.00"17.0914.133.549.294.4981.4

 

 

S360 Double Acting Actuator Dimensions

 

S360 Double Acting Actuator Dimensions (Metric)

Actuator SizeDimensions (mm)Actuator Weight (Kg)
ABCDEFlanged
DN887791955420.5
DN151341255268521.0
DN201641515598572.5
DN251701556098572.6
DN4022320171123744.8
DN5026623885150868.0
DN654073599018619913.6
DN804073599018619927.0
DN1004343599023611432.4

 

 

S360 Double Acting Actuator Dimensions (Imperial)

Actuator SizeDimensions (inches)Actuator Weight
ABCDEFlanged
0.25"3.443.130.762.171.651.1
0.50"5.274.912.062.682.032.2
0.75"6.445.932.173.872.245.5
1.00"6.696.102.353.862.245.7
1.50"8.787.912.804.842.9110.6
2.00"10.479.373.355.913.4017.6
2.50"16.0214.133.547.327.8329.9
3.00"16.0214.133.549.294.4964.7
4.00"17.0914.133.549.294.4971.3

 


Dimension “A” relates to 2-way body OD tubing; all other body variations are available at saundersdrawings.com. Please contact CRANE ChemPharma, Saunders® for the latest dimensional information. The above drawing should only be used as a general reference.

 

 

Back to Top

 

 


 

 

Literature Documents

 


Specifications and Literature
Saunders® HC4 S360 Actuator - Brochure (EN LT)
Saunders® HC4 S360 Actuator - Brochure (EN A4)
saunders s360

Copyright © 2017 Crane Co. All Rights Reserved.